 | 510 North West Datsun Enthusiasts Forum : Datsun : 510 Topic: Flywheel bolts |
| Author | Message |
|
defdes
Enthusiast 
Joined: 17 May 2003 Location: United States Posts: 849 |
 Topic: Flywheel boltsPosted: 01 December 2005 at 9:20pm |
|
Where to find them? Just got my FJ flywheel from Oz and I need 8.
|
|
|
'72 LZ22 510
'71 L16 510 Vintage CS Racer |
|
 IP Logged |
|
|
Hainz
Guru 
Joined: 03 December 2002 Posts: 3122 |
Posted: 03 December 2005 at 8:31am |
|
arnt they the same as the stock 510 bolts/or L series crank bolts
|
|
|
IP Logged |
|
|
defdes
Enthusiast
Joined: 17 May 2003 Location: United States Posts: 849 |
Posted: 03 December 2005 at 10:43am |
|
Yeah they are, I just wasnt sure where to get those either.
|
|
|
'72 LZ22 510
'71 L16 510 Vintage CS Racer |
|
|
IP Logged |
|
|
Hainz
Guru
Joined: 03 December 2002 Posts: 3122 |
Posted: 04 December 2005 at 8:23am |
|
dealer has them.
I dont have the part # with me put they have them |
|
|
IP Logged |
|
|
dayton100
Groupie 
Joined: 26 December 2002 Location: United States Posts: 97 |
Posted: 05 December 2005 at 4:03am |
this it 
|
|
|
IP Logged |
|
|
Bleach
Guru
Joined: 04 December 2002 Location: United States Posts: 4806 |
Posted: 05 December 2005 at 12:22pm |
|
You need 8? I thought they all used 6. silly Auzzie Datsuns
|
|
|
IP Logged |
|
|
defdes
Enthusiast
Joined: 17 May 2003 Location: United States Posts: 849 |
Posted: 05 December 2005 at 1:04pm |
|
I know, go figure. I'll have 2 extras up for grabs after I order two sets. Any takers?
|
|
|
'72 LZ22 510
'71 L16 510 Vintage CS Racer |
|
|
IP Logged |
|
|
Hainz
Guru
Joined: 03 December 2002 Posts: 3122 |
Posted: 05 December 2005 at 2:10pm |
|
$4 abolt from nissanparts.cc
|
|
|
IP Logged |
|
|
74wagon710
Enthusiast
Joined: 14 March 2004 Location: United States Posts: 925 |
Posted: 05 December 2005 at 3:30pm |
|
Does ARP make any that will fit?
|
|
|
74 Datsun 710 wagon, all original now, near perfect shape, project vehicle now.
83 Hell Camino. 07 Civic Si Coupe. 07 Yamaha R1 |
|
|
IP Logged |
|
|
defdes
Enthusiast
Joined: 17 May 2003 Location: United States Posts: 849 |
Posted: 05 December 2005 at 4:47pm |
|
They must, I think they are 10mm x 1 1/2"? but I havent checked...
|
|
|
'72 LZ22 510
'71 L16 510 Vintage CS Racer |
|
|
IP Logged |
|
|
earwig
Enthusiast
Joined: 09 December 2002 Location: United States Posts: 857 |
Posted: 06 December 2005 at 1:22pm |
|
i got mine at Truevalue Hardware for $2.50 0r $3 each. they are fine thread, either 25 or 30mm long. don't forget the Loc Tight! i messed up a flywheel once really bad. the bolt holes ended up all cone shaped. don't be this guy! hee, hee.
|
|
|
red'76,620regularcab,longbed L20B,Supertrap,3"shackle4"body 31X10.5X15 chrome pathfinder rims,2tube front,1tube rear bumper,720 5speed&transfercase,Blaster coil,Pertronics ingitor dizzy,WeberDGV,K&N
|
|
|
IP Logged |
|
|
defdes
Enthusiast
Joined: 17 May 2003 Location: United States Posts: 849 |
Posted: 06 December 2005 at 3:24pm |
|
Santa Monica Nissan wants $8/per...I don't think so.
|
|
|
'72 LZ22 510
'71 L16 510 Vintage CS Racer |
|
|
IP Logged |
|