2757 parts compatability question

Message

   i just busted a u-joint on my 260Z on the driver side, so i was wondering, i saw a 280Z or ZX at u-pull-it and was wondering if those would work? or if any other Z car parts would work, or if anyone has one layin around i'd appriate it if ya could help me out 

Author	Message
anubis_4_99 Enthusiast Joined: 22 April 2004 Location: United States Posts: 346	Topic: parts compatability question Posted: 20 June 2005 at 9:50pm
	i just busted a u-joint on my 260Z on the driver side, so i was wondering, i saw a 280Z or ZX at u-pull-it and was wondering if those would work? or if any other Z car parts would work, or if anyone has one layin around i'd appriate it if ya could help me out
	IP Logged

Bleach Guru Joined: 04 December 2002 Location: United States Posts: 4806	Posted: 20 June 2005 at 11:12pm
	If you are still running the R180 rearend, then you have to use R180 type half shafts. I don't know if the Ujoints themselves swap in from a ZX or if they are even replacable ujoints. All R200 280Z and 280ZX halfshafts will interchange. Some 280ZX's have an R180. I think those are the nonturbo automatic cars.
	Ratsun.net
	IP Logged

anubis_4_99 Enthusiast Joined: 22 April 2004 Location: United States Posts: 346	Posted: 20 June 2005 at 11:46pm
	im pretty sure its an R-200, the thing is huge, i'll be under the car tomorrow to drop the stuff and go find the part's, i was tired so i didnt know what i was writeing, lol, i snapped the half shaft where it connects to wheel so i need the whole driver side half shalft assembly
	IP Logged

anubis_4_99 Enthusiast Joined: 22 April 2004 Location: United States Posts: 346	Posted: 20 June 2005 at 11:55pm
	i think i also read somewhere, i think it was ratdat.com that 260's come with an R-200 stock
	IP Logged