 | 510 North West Datsun Enthusiasts Forum : Datsun : 510 Topic: Weber Carb/Fuel Injection |
| Author | Message |
|
rpanther04
Groupie 
Joined: 23 January 2005 Location: United States Posts: 80 |
 Topic: Weber Carb/Fuel InjectionPosted: 01 February 2005 at 1:21am |
|
I just bought a 45 DOCE dual weber carb. I was just wondering where do i get the linkage and intake manifold and how would they run on a LZ22 with a stock cam. I have 38mm SU's on now. When is was looking for manifolds i found that they make a fuel injected weber setup. Would that work on the 510? Has anyone done it????
|
|
 IP Logged |
|
|
Bleach
Guru 
Joined: 04 December 2002 Location: United States Posts: 4806 |
Posted: 01 February 2005 at 10:30am |
|
I've seen those four throttle body fuel injection setups for the 4-cyl L-series. Very expensive. But sure, they work. They're made for the Datsun.
|
|
|
IP Logged |
|
|
rpanther04
Groupie
Joined: 23 January 2005 Location: United States Posts: 80 |
Posted: 01 February 2005 at 2:23pm |
|
Cool ill look into that for a future mod. Also i was wondering, i'm running 38mm SU's and i just got the 45 DOCE webers. Which is better and why? OHh and where can i ge the manifold? Thanks !
|
|
|
IP Logged |
|
|
74wagon710
Enthusiast 
Joined: 14 March 2004 Location: United States Posts: 925 |
Posted: 01 February 2005 at 9:39pm |
|
Webers for top end power but the SU's will probably do better at low end. If your LZ22 is built or has a nice cam the Webers would be an overall better choice if you race it or like to go fast. Some people say that the Webers are harder to keep in tune but I always had good luck with the dual Webers on my 76 BMW 2002. They were 40's though on a 2 liter four. Its not that hard to tune them, I did it by ear and they ran perfect excpet in cold weather, theyd ice up since there was no way to warm the venturis.
|
|
|
74 Datsun 710 wagon, all original now, near perfect shape, project vehicle now.
83 Hell Camino. 07 Civic Si Coupe. 07 Yamaha R1 |
|
|
IP Logged |
|
|
defdes
Enthusiast
Joined: 17 May 2003 Location: United States Posts: 849 |
Posted: 02 February 2005 at 8:36am |
|
Originally posted by rpanther04
OHh and where can i ge the manifold? Thanks ! there's a Cannon on ebay right now under "510". ...looking at it again, it might be for 40's. |
|
|
'72 LZ22 510
'71 L16 510 Vintage CS Racer |
|
|
IP Logged |
|
|
Bleach
Guru
Joined: 04 December 2002 Location: United States Posts: 4806 |
Posted: 02 February 2005 at 5:54pm |
|
IP Logged |
|
|
Ryan in Seattle
Expert 
Joined: 08 December 2002 Location: United States Posts: 2701 |
Posted: 03 February 2005 at 10:07am |
|
I've always loved that picture.
|
|
|
1973 620 "Prerunner"
L20B,A87,5spd.Lynx,40dcoe, header,cammed & bored. zx oil pump,starter,headbolts & water pump/pulley. 
|
|
|
IP Logged |
|
|
rpanther04
Groupie
Joined: 23 January 2005 Location: United States Posts: 80 |
Posted: 03 February 2005 at 8:09pm |
|
WOW, i would love to have that setup. Anyway im getting the maifold, hope its better :-D
|
|
|
IP Logged |
|
